Spa Fix'r - pipe sealer
Spa Fix'r is a liquid pipe sealant and is added directly to the spa water as it recirculates. Small leaks in your whirlpool or hot tub are sealed by the agent.
Dosage:
Essentials SPA FIX should be dosed as follows: 225ml per 2000L of water
Application:
Take out all filters. For sand filters select the BYPASS option (if possible) prior to application.
In the filtration cycle, slowly pour SPA FIX directly into the filter/skimmer unit or before a bypass/intake manifold.
SPA FIX is very heavy and settles at the lowest points. Most of the time it's at the end of the day. Therefore, the agent must be put back into circulation (through circulation) every 45 minutes.
Let the water circulate for at least 3 hours. Then check whether the leak has become tight or smaller. If it has become smaller, the circulation should be continued for another 3 hours.
Once the leak is sealed, stop the circulation and allow the agent to sink and settle. Residue can then be removed with a spa VAC (suction nozzle).
Replace the filters; let the water circulate for another 45 minutes. Then remove the filters and rinse them thoroughly with clean water so that the fins are free of deposits.
After the leak has been sealed, it is recommended that the spa be completely drained and left for at least 48 hours. This is how SPA FIX hardens completely.
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login